As an Amazon Associate I earn from qualifying purchases.1. suptek
Max Load 8kg, VESA Compatible 75x75mm/100x100mm, VESA Mount Adapter for 13-27 inch Screens without Mounting Holes, Non VESA Adapter Mount Kit, Suptek Non VESA Monitor Mount
suptek - Any assistance needed, just adjust this vesa mount adapter bracket to a suitable position, you can email us at any time. This non vesa mount adapter is made of cold-rolled steel for better security, soft padding and plastic grips protects scratches.
Suptek non vesa monitor mount fits most 13”-27” screens with thickness 2. 54-6. 98cm, bezel height 2.
66-4. 12cm, max weight 8kg. When using for small screen, then fix it. This vesa adapter mount kit includes all the accessories you need for installation, our 24 hours online customer service is provided as well. Knob direction can be 360° rotated, bottom knob screw can also be adjusted from 3cm to 4. 5cm for a wider range of monitors.
2. HUANUO
Non VESA Mount Adapter Plate, Fit Existing Monitor Mount Bracket with 75x75 VESA Plate, HUANUO Non VESA Adapter Monitor Arm Kit for 17 to 27 LED LED Screens Without VESA Mount Holes
HUANUO - The adjustable width range of the extension bar is 28. 6 - 42. 6 cm, and the diagonal range is 43. 5 - 59 cm suitable for most 17"-27" displays. Universal non vesa adapter - this non vesa monitor mount adapter easily converts non-vesa compatible monitors to 75 mm vesa for mounting on the monitor stand.
1. All accessories included - this non vesa adapter kit contains all the accessories you need for installation. Flexible & adjustable non vesa mount adapter - adjustable screen tab supports 30 - 75 mm thickness screens, please choose M5 x 40 mm screws; 2.
The attached installation manual has detailed installation steps, you can easily complete the installation within 10 minutes. Easy installation - flexible installation and easy disassembly. The soft padding in the back of the non VESA adapter mounting bar and durable plastic grips, protecting the back and edges of your monitor from scratches.
If your monitor thickness is less than 57 mm, please use M5 x 65 mm screws. Quality craft - this non vesa adapter is made of cold-rolled steel, which can hold your displays securely. Note: please make sure you have the 75 mm VESA plate configuration option in your existing vesa monitor arm. Including mounting plate, M6 screw, M5 screw, wrench, screen fixing clip and screen anti-scratch pad.
| Brand | HUANUO |
| Manufacturer | HUANUO |
| Height | 12 cm (4.72 Inches) |
| Length | 31 cm (12.2 Inches) |
| Weight | 0.75 kg (1.65 Pounds) |
| Width | 2 cm (0.79 Inches) |
| Part Number | HNMUA4 |
| Model | HNMUA4 |
| Warranty | Lifetime Warranty Against ManufacturerS Defects |
3. Pukkr
LCD Computer Screen Bracket Adapter Kit | Supports 10KG | Pukkr, Monitor Adapter Mount Kit | Non-VESA PC Screen Mounting | 20” to 27” Screens | LED
Pukkr - Strong support - this reliable non-vesa adapter can support up to 10kg in weight and monitor sizes from 20” to 27”. Installation - the adapter clips to the edge of your monitor and screws into standard 75mm and 100mm mounting holes.
You can have full faith that this mounting kit will support your screen. Adjustable to different dimensions of screen sizes. All the fixings that you need are included, so all you have to do is connect the kit to the bracket and insert your screen.
Monitor mount kit - the pukkr monitor adapter mount kit is the ideal comprehensive kit for mounting your non-VESA PC monitor onto a bracket.
Screen sizes - screen sizes from 20” to 27”. 2-year warranty - the pukkr Monitor Adapter Mount Kit comes with a 2-year manufacturer's warranty. Monitor height between 41. 1cm and 48. 7cm. Make sure the adjustable adapter is securely attached to the bracket before mounting your monitor.
| Brand | Pukkr |
| Height | 10.2 cm (4.02 Inches) |
| Length | 3.3 cm (1.3 Inches) |
| Weight | 0.59 kg (1.31 Pounds) |
| Width | 24.7 cm (9.72 Inches) |
4. Jcevium
Non-VESA Adapter for 17 to 29 Inch Monitor Screens to 75X75 and 100X100 VESA Mount, Jcevium Universal VESA Mount Adapter Kit
Jcevium - Installation can be finished within minutes. This non-vesa adapter mounting kit can be easily adjusted for different monitors.
Universal vesa mount adapter - fits vesa mount stand with 75 mm x 75 mm and 100 mm x 100 mm plates. Adjustable vesa adapter - designed with adjustable which can be extended to accommodate varying sizes and shapes of monitors.
Supports 17 to 29 inches lcd leD OLED flat panel monitor screens with thickness from 1. 18 inches to 2. 95 inches. Easy assembly - includes manual, related screws and parts for easy installation. Easy to mount your non-VESA monitors to VESA mounts.
| Brand | Jcevium |
| Manufacturer | Jcevium |
| Height | 3 cm (1.18 Inches) |
| Length | 31 cm (12.2 Inches) |
| Weight | 0.73 kg (1.6 Pounds) |
| Width | 13 cm (5.12 Inches) |
| Part Number | 500049208 |
| Model | 500049208 |
5. Allsortsoutlet
Allsortsoutlet NON VESA Monitor Adapter Mount Kit Bracket for 20" to 30" LED LCD Computer Screens 75mm and 100mm Mounting Holes
Allsortsoutlet - Fits most widescreen lcd/LED computer monitors between 20" - 30". Kit for adapting your non-VESA monitor to be used with a VESA mounting bracket. Good quality with black paint finish. Suitable for vesa mounts with 75x75mm and 100mmx100mm mounting holes. Includes all required screws and hardware.
| Brand | Allsortsoutlet |
| Manufacturer | Allsortsoutlet |
| Height | 3.81 cm (1.5 Inches) |
| Length | 24.61 cm (9.69 Inches) |
| Weight | 1.32 |
| Width | 10.21 cm (4.02 Inches) |
| Part Number | unknown |
6. VIVO
Grommet Base, Holds 2 LCD LED Screens up to 27 inches without VESA Holes, Black, STAND-V002VA, Fully Adjustable Stand with C-Clamp, VIVO Non-VESA Dual Monitor Arm Desk Mount with VESA Adapter Brackets
VIVO - Detachable cable clips on the arms and center pole also keep your power and AV cables clean and organized. Hook padding & cable management - hooks feature inside padding to protect the outside of your screens from scratches and slipping.
We've got you covered - sturdy steel design is backed with a 3 Year Manufacturer Warranty and friendly tech support to help with any questions or concerns. Easy installation - mounting your monitors is a simple process with the flexible adapter bracket design, easy-to-follow instructions, and hardware provided.
Compatible with non-vesa monitors - designed to hold 2 screens 13” to 27” in size, weighing up to 17. 6 lbs each, and lacking VESA compatibility.
Please note: vesa adapter brackets do not allow monitors to be placed in a portrait orientation. Articulation & height adjustment - adjustable mount offers +90° to -90° tilt, +5° to -5° screen leveling, 360° swivel, and height adjustment along the center pole. Not recommended for curved monitors, and does not work with screens that have power and video ports located near the center, as ports would be covered.
| Brand | VIVO |
| Manufacturer | VIVO |
| Part Number | STAND-V002VA |
| Model | STAND-V002VA |
7. ONKRON
ONKRON VESA Mount Bracket Non-VESA Monitor Arm Mounting Kit for Screen 17” to 27- inch VESA 75x75 mm A2V Black
ONKRON - Converts a non-vesa monitors into 75x75 mm vesA mounting standard suitable for mounting both on desk mounts and wall mounts with VESA 75x75 mm.
Vesa adapter is adjustable in all directions to perfectly match your monitor and provide strong and secure grip. Compatible with most modern screens with diagonal 17 – 27 inches weighing up to 17.
6 lbs; screen thickness of 1. 19” to 3”. High-quality steel construction securely holds your screen, soft pad in the plastic grips prevent scratching of the monitor. Comes with all needed hardware and a detailed manual for quick and easy installation.
8. Pholiten
VESA Compatible 75x75mm/100x100mm, Single Monitor Arm Non VESA Adapter Mount Kit for 13-27 inch Screens without Mounting Holes, Pholiten Single Monitor Mount with Non VESA Adapter, Max Load 10kg
Pholiten - Solid, clean and minimalist. This customization allows a person to position their monitor in the exact spot it needs to be to prevent them from straining their neck and eyes while they use it over an extended period.
This single-arm mount fits screens that weigh up to 10kg with backside mounting. Screen compatibility - this monitor arm desk mount equipped with a vesa adapter. Solid, stable, clean and minimalist. Cable guides are just ok.
As easy to setup as it was affordable. No-vesa hole monitor is also universal. Good range of motion: with vesa monitor stand, stable, a person can easily switch their monitor from landscape to portrait mode.
Assembled without having to look at the instructions and put into use in minutes. Use velcro ties for better cleaner management. Having two option to mount desk clamp + grommet, its versatile. This covers most monitors on the market between 13 and 27 inch. Very flexible and sturdy. Solid construction: this single monitor stand is heavy duty, sturdy as can be. The bolts hold it in position very well.
| Brand | Pholiten |
| Part Number | MD9421WK002 |
| Model | MD9421WK002 |
9. Duronic
Existing Monitor Arm VESA 75/100 Mounting Pattern, Duronic NON VESA Monitor Adapter DMAD1NV, Weight Capacity 8kg, Mounting Kit for TV & PC Monitor Screens Up To 27” Without VESA Rear Fixing Holes
Duronic - It will hold most flat screen TV/PCs up to 27" and that weigh no more than 8kg. As part of our desk mount range it offers a clever solution to those who are stuck with a monitor that doesn't have VESA mounting and offers an alternative way to install the screen onto monitor arms.
L-shaped clips fit screens up to 6. 3cm thick. It has a matt black finish that blends in perfectly with most monitors and matches our range of desk mounts. This non-veSA adapter is no exception. Universal fitting for flat screens: the dmad1nv has been specially designed to extend the fitting of a tv or pc monitor arm to accommodate non-VESA flat screens.
The 4 l-shaped clips holding the screen will keep it firmly in place with very little movement and will not damage the outer screen bezel or frame.
This adapter comes with a variety of screws and hardware to cater for both thicker and thinner flat screen monitors. If you have an unusual shaped screen i. E. Accommodates screens up to 27"with a maximum weight of 8kg. With the dmad1nv we offer the perfect solution to resolve compatibility issues when trying to install flat screens without integrated VESA mounting holes. The back is curved you may find assembly easier with two sets of hands in the final stages.
| Brand | Duronic |
| Manufacturer | Duronic |
| Length | 68.58 cm (27 Inches) |
| Weight | 0.76 kg (1.69 Pounds) |
| Part Number | DMAD1NV |
| Model | DMAD1NV |
10. Invision
Invision Non VESA Adapter Kit Monitor Arm Mounting for Screens 17" – 27” Without Rear Fixing Holes, Max Load Capacity 6.5kg NV100, Existing Monitor Bracket Must Have VESA 75x75mm Mounting Pattern
Invision - Compatible with a wide range of makes and models - screen size needs to be between 17" and 27" and the display monitor thickness must be between 30mm - 75mm for this product to be securely attached. Our helpful customer support team is on hand should you require any assistance with your product or installation.
High-quality build with strong and secure grip on your screen – made from cold-rolled steel with padded screen clamps to hold your screen tight without damaging your outer screen bezel.
Maximum load capacity 6. 5kg. World class customer support – the nv100 works perfectly with most types of monitor arms brackets. Please make sure your existing mount has pre-drilled VESA 75mm x 75mm configuration option for the NV100 to attach to otherwise this product won’t work.
Please note: a minimum of 5mm diameter VESA holes in the existing monitor arm bracket is required for this to fit. The perfect solution for non-vesa pc monitor screens – if your pc monitor screen does not have integrated mounting holes then the NV100 is the perfect partner which allows the mounting of NON VESA monitors to existing screen mounts. Safe & secure installation – comprehensive instructions included with easy step-by-step guide.
| Brand | Invision |
| Manufacturer | Invision Technology |
| Weight | 0.76 kg (1.68 Pounds) |
| Part Number | NV100 |
| Model | NV100 |
| Warranty | 3 Year Warranty, all parts covered by Invision Product Guarantee |
suptek - Any assistance needed, just adjust this vesa mount adapter bracket to a suitable position, you can email us at any time. This non vesa mount adapter is made of cold-rolled steel for better security, soft padding and plastic grips protects scratches.
HUANUO - The adjustable width range of the extension bar is 28. 6 - 42. 6 cm, and the diagonal range is 43. 5 - 59 cm suitable for most 17"-27" displays. Universal non vesa adapter - this non vesa monitor mount adapter easily converts non-vesa compatible monitors to 75 mm vesa for mounting on the monitor stand.
Pukkr - Strong support - this reliable non-vesa adapter can support up to 10kg in weight and monitor sizes from 20” to 27”. Installation - the adapter clips to the edge of your monitor and screws into standard 75mm and 100mm mounting holes.
Jcevium - Installation can be finished within minutes. This non-vesa adapter mounting kit can be easily adjusted for different monitors.
Allsortsoutlet - Fits most widescreen lcd/LED computer monitors between 20" - 30". Kit for adapting your non-VESA monitor to be used with a VESA mounting bracket. Good quality with black paint finish. Suitable for vesa mounts with 75x75mm and 100mmx100mm mounting holes. Includes all required screws and hardware.
VIVO - Detachable cable clips on the arms and center pole also keep your power and AV cables clean and organized. Hook padding & cable management - hooks feature inside padding to protect the outside of your screens from scratches and slipping.
ONKRON - Converts a non-vesa monitors into 75x75 mm vesA mounting standard suitable for mounting both on desk mounts and wall mounts with VESA 75x75 mm.
Pholiten - Solid, clean and minimalist. This customization allows a person to position their monitor in the exact spot it needs to be to prevent them from straining their neck and eyes while they use it over an extended period.
Duronic - It will hold most flat screen TV/PCs up to 27" and that weigh no more than 8kg. As part of our desk mount range it offers a clever solution to those who are stuck with a monitor that doesn't have VESA mounting and offers an alternative way to install the screen onto monitor arms.
Invision - Compatible with a wide range of makes and models - screen size needs to be between 17" and 27" and the display monitor thickness must be between 30mm - 75mm for this product to be securely attached. Our helpful customer support team is on hand should you require any assistance with your product or installation.
