As an Amazon Associate I earn from qualifying purchases.1. Sea Cleanz
Seaclean2 Ultrasonic cleaning fluid, 500ml
Sea Cleanz - 500ml bottle with push and twist cap. Powerful ultrasonic cleaning solution that aids the removal of rust, grease, carbon deposit, grime and dirt.
Made in the UK. Applications include all suitably sized engine parts and components, tools, jewellery, solid metal parts. Natural ingredients for safe disposal after use.
| Brand | Sea Cleanz |
| Manufacturer | Laser |
| Weight | 0.5 kg (1.1 Pounds) |
| Part Number | 6289 |
| Model | 6289 |
2. Allendale Ultrasonics
ALLENDALE ULTRASONICS US-SO-CAR-1L 1 Litre Concentrated Carburettor, Machine & Engine Parts Ultrasonic Cleaning Fluid Solution Cleaner Detergent Degreaser Dirt Remover
Allendale Ultrasonics - Safe on brass, aluminium and other sensitive metals, always test on new applications. Operating temperature of bath should be set between 50 - 80 degrees centigrade.
Popular with both professionals and hobbyists, takes the effort out of cleaning, whilst providing amazing results. The cleaning process will not damage, corrode or darken metal components.
Concentrated: 1:10, will make 11 litres of soluTION we recommend using deionised/demineralized water. Powerful specialist formulation for adding to Ultrasonic baths for cleaning engine parts including carburettors, valves, heat exchangers and other machine parts. Safely removes contaminants including general soiling, carbon and grease etc.
| Brand | Allendale Ultrasonics |
| Height | 9 cm (3.54 Inches) |
| Length | 24 cm (9.45 Inches) |
| Weight | 1.16 kg (2.56 Pounds) |
| Width | 9 cm (3.54 Inches) |
| Part Number | US-SO-CAR-1L |
3. Allendale Ultrasonics
1 Litre Cleaning Fluid, Allendale Ultrasonics Oxidation and Rust Removal Concentrated Ultrasonic Cleaner Solution
Allendale Ultrasonics - It is totally biodegradable and phosphate free. A specialist acidic formulation for adding to Ultrasonic baths for removing oxidation and rust from metals including iron, tin, cast Iron, copper, aluminium and steel / stainless steel.
It is ideal for engine parts including carburetors, valves, heat exchangers etc as well as metals that have been in storage.
Other applications include oxides resulting from soldering or welding, cleaning rusty / corroded tools. The cleaning process will not damage, corrode or darken most metal components. As well as removing oxides it safely removes contaminants including general soiling, carbon and grease etc.
4. Allendale Ultrasonics
Machine & Engine Parts Ultrasonic Cleaning Fluid Solution Cleaner Detergent Degreaser Dirt Remover, ALLENDALE ULTRASONICS US-SO-CAR-5L 5 Litre Concentrated Carburettor
Allendale Ultrasonics - Operating temperature of bath should be set between 50 - 80 degrees centigrade. The cleaning process will not damage, corrode or darken metal components. Safe on brass, aluminium and other sensitive metals. It safely removes contaminants including general soiling, carbon and grease.
A specialist formulation for adding to ultrasonic baths for cleaning engine parts including carburettors, valves, heat exchangers etc. The concentrate solution is added to water at a rate of 1 part concentrate to 10 parts of water we recommend using deionised / de-mineralized water.
5. Allendale Ultrasonics
5 Litre Cleaning Fluid, Allendale Ultrasonics Concentrated Oxidation and Rust Removal Ultrasonic Cleaner Solution
Allendale Ultrasonics - Great for removing oxides from soldering or welding, cleaning rusty/corroded tools. Specialist acidic formulation for adding to ultrasonic baths, tin, cast iron, for removing oxidation and rust from metals including iron, copper, aluminium and steel/stainless steel.
The concentrate solution is added to water at a rate of 1 part concentrate to 10 parts of water we recommend using deionised/de-mineralised water.
Also safely removes contaminants including general soiling, carbon and grease etc. It is totally biodegradable and phosphate free. Ideal for engine parts including carburettors, valves, heat exchangers etc as well as metals that have been in storage. The cleaning process will not damage, corrode or darken most metal components.
6. Carbusonic
Tools and motorbike parts 1 litre, Carbusonic Ultrasonic carburettor cleaning solution 1lt removes dirt and grease from engine parts
Carbusonic - Use multiple times for great value. Unlike acid-based cleaners our solution will not attack aluminium to darken the surface instead it is compatible and leave a good clean finish. Powerful performance great for restoration & maintenance dilute Up to 1- 10 with hot water. Used by professionals developed in the uk great feedback Carbusonic limited have 35 years' experience in chemical coatings and rust treatment products formulated to exacting standards, every batch is tested to meet strict guidelines and through years of experience and feedback we know what the customer expects.
Alcohol based surfactants and buffering agents combine to impact debris with over 4000c implosions produced by ultrasonic sound waves to break down surface contamination. Aluminium safe, aluminium, brass, tin, will not darken parts. Restores performance - removes gelled fuel, oxide and debris from bowels and jets.
Gelled fuel from standing or over-wintering vehicles has a dramatic effect on fuel system and power output, tarnish, cleaning your carburettor with ultrasonic fluid restores power and fuel efficiency by unblocking jets and float chambers allowing proper injection and fuel to air ratio. Use on steel, plastic, Ceramic, Copper, Zinc, Rubber and glass. The grime is held in solution leaving the item clean and decontaminated. Ideally suited to carburettor cleaning - safely restores manifolds, carburettors and most machine parts.
| Brand | Carbusonic |
| Manufacturer | Carbusonic limited |
| Height | 20 cm (7.87 Inches) |
| Length | 10 cm (3.94 Inches) |
| Weight | 1 kg (2.2 Pounds) |
| Width | 20 cm (7.87 Inches) |
| Part Number | ep24r |
| Model | ep24r |
| Warranty | 1 |
7. ULTRAsonic Pro
Ultrasonic Fluid Concentrate Carburettor Cleaner Solution Carb Engine & Parts Professional Concentrate
ULTRAsonic Pro - Safe on automotive metals, rubber, plastic, alloys. Removes grime, carbon, grease and old fuel build up. Fast acting, cleans parts in as low as 3 minutes. Ultrasonic pro is suitable for home and professional use. Safe on painted surfaces.
8. Allendale Ultrasonics
Allendale Ultrasonics 3L Industrial Ultrasonic Cleaner Dial Tank Heated Pro Bath with Basket and Carburettor Cleaning Solution
Allendale Ultrasonics - The 1 litre of our specialist carburettor formulation is added to Ultrasonic Cleaner baths for cleaning engine parts including carburettors, valves, heat exchangers etc.
The concentrate solution is added to water at a rate of 1 part concentrate to 10 parts of water we recommend using deionised / de-mineralized water. The kit includes a 3l dial ultrasonic cleaner and 1L of our specially designed carburettor cleaning solution.
The ultrasonic tank is 240x137x100mm and the basket is 222mmx130x75mm please confirm sizes before you order. The ultrasonic cleaner is a 220V 3 Litre tank with dial controls to set temperature and the timer.
9. Carbusonic
Ultrasonic brass clock cleaning fluid solution concentrate 1lt for sensitive metals and antiques 1 litre
Carbusonic - Works on most metals and sensitive metals. Removes tarnish, grease, oxidation and lacquer. Concentrated. Antique Brass clock Cleaning fluid. Ammoniated formula.
| Brand | Carbusonic |
| Manufacturer | apl chemicals |
| Height | 10 cm (3.94 Inches) |
| Length | 10 cm (3.94 Inches) |
| Weight | 2.2 |
| Width | 3.94 |
| Part Number | car53 |
Sea Cleanz - 500ml bottle with push and twist cap. Powerful ultrasonic cleaning solution that aids the removal of rust, grease, carbon deposit, grime and dirt. Made in the UK. Applications include all suitably sized engine parts and components, tools, jewellery, solid metal parts. Natural ingredients for safe disposal after use.
Allendale Ultrasonics - Safe on brass, aluminium and other sensitive metals, always test on new applications. Operating temperature of bath should be set between 50 - 80 degrees centigrade.
Allendale Ultrasonics - Operating temperature of bath should be set between 50 - 80 degrees centigrade. The cleaning process will not damage, corrode or darken metal components. Safe on brass, aluminium and other sensitive metals. It safely removes contaminants including general soiling, carbon and grease. A specialist formulation for adding to ultrasonic baths for cleaning engine parts including carburettors, valves, heat exchangers etc. The concentrate solution is added to water at a rate of 1 part concentrate to 10 parts of water we recommend using deionised / de-mineralized water.
Carbusonic - Use multiple times for great value. Unlike acid-based cleaners our solution will not attack aluminium to darken the surface instead it is compatible and leave a good clean finish. Powerful performance great for restoration & maintenance dilute Up to 1- 10 with hot water. Used by professionals developed in the uk great feedback Carbusonic limited have 35 years' experience in chemical coatings and rust treatment products formulated to exacting standards, every batch is tested to meet strict guidelines and through years of experience and feedback we know what the customer expects.
ULTRAsonic Pro - Safe on automotive metals, rubber, plastic, alloys. Removes grime, carbon, grease and old fuel build up. Fast acting, cleans parts in as low as 3 minutes. Ultrasonic pro is suitable for home and professional use. Safe on painted surfaces.
Allendale Ultrasonics - The 1 litre of our specialist carburettor formulation is added to Ultrasonic Cleaner baths for cleaning engine parts including carburettors, valves, heat exchangers etc.
